Публикации

Verification of the heat transfer model for screw reactor

Статья конференции
Levin A., Kozlov A., Svishchev D., Penzik M.
11th International Conference on Computational Heat, Mass and Momentum Transfer, ICCHMT 2018
MATEC Web of Conferences. Vol.240. ID: 05017.
2018
At present, the screw reactor pyrolysis is a promising and rapidly developing technology, because it helps obtain the end product, which is charcoal, tar, and synthesis gas. Additionally, pyrolysis can be considered as a preliminary stage for making the charcoal of the preset conversion for its further gasification when obtaining coal-derived gas. This research aims at establishing relationships between the operational parameters of pyrolysis and obtaining of the charcoal of preset conversion by means of mathematical modeling, full-scale experiment, and instrumental studies. Such comprehensive research ensures the accurate initial data, verification of the model, and optimal parameters for obtaining the product with preset properties as well as for further scaling of the reactor. In terms of design the pyrolyzer represents a recuperative heat exchanger where a mix of stack and recirculation gases is considered as a heat carrier. To prevent sintering of particles the screw transportation of fuel is used. The Comsol Multiphysics Software is used as a simulation environment. Heat exchange in the process of pyrolysis is simulated considering physical properties (porosity, permeability, etc.) of the medium. The constructed calculated mesh consisted of 604 thousand elements of three types (tetrahedrons, prisms and pyramids) and had the minimum size of 0.2 mm. © The Authors, published by EDP Sciences, 2018.

Библиографическая ссылка

Levin A., Kozlov A., Svishchev D., Penzik M. Verification of the heat transfer model for screw reactor // MATEC Web of Conferences. Vol.240. ID: 05017. 2018. DOI: 10.1051/matecconf/201824005017

Телефоны

основной    +7(3952) 500-646
приемная    +7(3952) 42-47-00
факс     +7(3952) 42-67-96
Смотреть справочник